Roof Snow Block
Subject: Roof Snow BlockSolicitation Number: FA446027Q0004Notice Type: SRCSGTNAICS: 332322Set-Aside: Total Small BusinessNotice Published: 11-20-26Response Due: 11-27-26Agency: Department of the Air ForceOffice: FA4460 19 CONS PKAContact: Kevin Zubia Martinez This email address is being protected from spambots. You need JavaScript enabled to view it. Ph: (501) 987-3842Office Address: LITTLE ROCK AFB, AR 72099-4971Place of Performance: Little Rock Air Force Base, AR 72099
Click for official SAM (FBO) notice, additional information, and accompanying attachments
This acquisition is a new requirement for the procurement of an engineered, continuous pipe or fence-style rail snow retention system for facility roof installation. System Configuration: Must be a continuous horizontal pipe- or fence-style rail snow retention system capable of bridging across structural roof panels and providing continuous longitudinal perimeter retention. Retention Capacity & Coverage: System must furnish 720 linear feet of continuous perimeter retention coverage. Substrate Compatibility: Mounting clamps and hardware must be fully compatible with the host metal roofing profile (e.g., standing seam or exposed fastener). Attachment systems for standing-seam profiles must utilize non-penetrating clamping mechanisms to preserve the weather-tight integrity and manufacturer warranty of the roof panels. Structural Performance Thresholds: System components (brackets, clamps, rails, and fasteners) must be engineered and rated to resist site-specific snowpack and ice accumulation shear loads without permanent mechanical deflection. Clamp-to-seam holding strength must meet or exceed minimum structural thresholds (e.g., capable of sustaining design loads up to 500 lbs per clamp or linear foot minimum, adjusted to site-specific engineering design calculations). Fastening hardware must utilize round-point or non-cutting setscrew designs (e.g., 300-series stainless steel per ASTM F880) to prevent piercing, galling, or compromising protective coatings on metal roof seams.